| Hubbell Wiring Device-Kellems Product
Specifications |
| Device Type |
Flanged Inlet |
| Device Style |
Twist-Lock |
| Amperage |
20A/10A |
| Volts |
250V DC/600V AC |
| Poles and Wires |
4 Pole, 5 Wire Grounding |
| Design Type for Flanged Inlets
and Receptacles |
Nylon |
| Configuration Type |
Non NEMA |
| Color |
 |
| Terminal Retainer
Material |
Clear polycarbonate |
| Blade Material |
Brass |
| Terminal Clamp Material |
.08" (2) steel-nickel plated
|
| Terminal Screw Material |
#10-32 Brass (white finish on
neutral screw when used) Multi-drive |
| Ground Screw Material |
#10-32 Brass (green finish)
Multi-drive |
| Body Holding Screw
Material |
Steel, zinc plated Multi-drive
|
| Body Contact Carrier
Material |
Natural White Nylon |
| Flanged Casing Material |
Natural White Nylon |
| Mounting Screw Material |
Nickel-plated Brass Round head
screws |
| Ratings |
Molded into face |
| Catalog No. |
Permanently ink marked on
casing |
| Dielectric Voltage
Withstand |
2,000V minimum. |
| Current Interrupting |
Certified for current
interrupting at full rated current. |
| Temperature Rise |
Max 30 C temperature rise at
full rated current after 50 cycles of overload at 150% of rated
current at a power factor of .75. |
| Terminal Accommodation |
30A #10 AWG |
| Terminal Identification |
Terminals identified in
accordance with UL 498 (X, Y, Z, White, Green) |
| Flammability |
HB or better per UL 94 or CSA
22.2 No. 0.6 |
| Operating Temperatures |
Maximum Continuous 75 C Minimum
-40 C (w/o impact) |
| Listings |
UL/CSA |
